Diode, Rectifier, and Fuse Component Accessories
Diodes and Rectifiers
Fwd. Characteristics
Peak Rev. Voltage
Case
Part #
Diodes
Used for isolating signals (i.e., Gate In/Gate Out) 		1 Amp 800 V DO-41 00670
1V@10mA 100 V DO-35 30647
Schottkg Barrier Rectifier: 1 Amp 20 V   26108
OR'ing Diodes
Used for fault tolerant applications 		0.4V@30A@100°C 35 V TO-220-Dual 02838
0.38V@80A@100°C 15 V D-61-8 10122
Bridge Rectifiers
Used to rectify AC line 		8 Amps 600 V   03261  
35 Amps 600 V   30660
Zener Diode(1.5KE51A)
Used with ENMod system 		  51 V 41A-04 30262-051
Optocoupler
For logic disable		 Toshiba TLP595G (or TLP795G)     13468
6N139
HCPL-0701 Darlington		     26106
26109

Fuses
Rating
Part #
Fuse Holder
Part #
Standard design practices as well as safety agency conditions of acceptability often require appropriate fusing at the input of power conversion components
 2 Amps/450 Vdc 03360   PC-Tron®
Socket-Type
(min. order
100 pcs.) 		03144
2.5 Amps/450 Vdc 08395 03144
3 Amps/250 Vdc 30243 03144
5 Amps/125 Vdc 30276 03144
7 Amps/125 Vdc 30236      
10 Amps/125 Vdc 30247      
12 Amps/250 Vdc 05147   Vertical Mount
Horizontal Mount 		09981
10660		  
20 Amps/250 Vdc 30257      
30 Amps/125 Vdc 23196  
6.3 Amps/400 Vdc 22985        

Part
Description
Part #
Oscilloscope Test Jack
(for .095" diameter probe)
Recommended for common mode noise measurements
 Shielded, Horizontal 01830  
Shielded, Vertical 06207  
MOVs
For use with Front End Modules
 275 V MOV, 14mm Disc 30076
68 V MOV, 10mm Disc 30234-068
120 V MOV, 10mm Disc 30234-120
200 V MOV, 10mm Disc
30234-200

220 V MOV, 10mm Disc 30234-220
Gas Discharge Module
For use with the VI-ARM and ENMod applications
 220 V 13755
75 V 30515
Phased Array Controller (PAC) Chip
For use with arrays of up to 12 converters, the PAC chip provides phased operation to minimize overall noise
PAC Chip Data Sheet
  19077